Pump Accessories
Tubing
Types of suction and discharge tubing
Chemical feed pumps require suction and discharge tubing with proper sizing and chemical and pressure requirements.
Suction tubing must be of the proper length to connect to the feed tank or rigid suction piping. It can be low-pressure tubing but must have enough strength for any suction or vacuum condition.
Discharge tubing must be high-pressure tubing exceeding the expected discharge pressure of the pumping system. Rigid or reinforced tubing is used for discharge.
All tubing material must be compatible with the chemical being pumped. Do not assume that the tubing provided with the pump is compatible with your solution.
Tubing options
Blue-White offers a variety of tubing materials:
¼” ID x 3/8” OD tubing. Available in clear PVC (soft – 50 psi) or opaque polyethylene (Hard – 150 psi).
½” ID x ¾” OD tubing. Available in clear PVC (soft – 50 psi) or reinforced/braided PVC (150 psi).
Ordering Information
| Part Number | Description |
| 334-6 | Tubing, Suction, clear PVC 3/8” OD x 5 ft length |
| C-334-6-10 | Tubing, Suction, clear PVC 3/8” OD x 10 ft length |
| C-334-6-25 | Tubing, Suction, clear PVC 3/8” OD x 25 ft length |
| C-334-6-100 | Tubing, Suction, clear PVC 3/8” OD x 100 ft length |
| 76001-361 | Tubing, Suction, clear PVC, 1/2” ID x 3/4” OD, 8 ft length |
| C-335-6 | Tubing, Discharge, polyethylene, 3/8” OD x 5 ft length |
| C-335-6-10 | Tubing, Discharge, polyethylene, 3/8” OD x 10 ft length |
| C-335-6-25 | Tubing, Discharge, polyethylene, 3/8” OD x 25 ft length |
| C-335-6-100 | Tubing, Discharge, polyethylene, 3/8” OD x 100 ft length |
| 90008-437 | Tubing, Discharge, Clear Braided PVC, 1/2” ID x 3/4” OD. (sold per foot) |
Suction and discharge tubing must be 1/4″ ID x 3/8″ OD compatible with compression fittings connections and must be compatible with solution being pumped. Tubing can be acquired from any provider. The A-100NFP pump is shipped with 5” of PVC suction tubing and 5“ of Polyethylene discharge tubing.
Suction and discharge tubing must be 1/4″ ID x 3/8″ OD compatible with compression fittings connections and must be compatible with solution being pumped. Tubing can be acquired from any provider. The A-100NF pump is shipped with 5” of PVC suction tubing and 5“ of Polyethylene discharge tubing.
Yes. The clear PVC suction tubing and opaque polyethylene (PE) discharge tubing included with some pump models are provided to aid in pump installation. The opaque PE discharge tubing is rated for 150 PSI. It can be used as suction tubing.
Yes. The clear PVC suction tubing and opaque polyethylene (PE) discharge tubing included with some pump models are provided to aid in pump installation. The opaque PE discharge tubing is rated for 150 PSI. It can be used as suction tubing.
Yes. The clear PVC suction tubing and opaque polyethylene (PE) discharge tubing included with some pump models are provided to aid in pump installation. The opaque PE discharge tubing is rated for 150 PSI. It can be used as suction tubing.
The clear PVC suction tubing and opaque polyethylene (PE) discharge tubing included with some pump models are provided to aid in pump installation. The clear PVC tubing is rated for 40 PSI. It can be used on discharge as long as pressure is lower than 40 PSI.
Yes. The clear PVC suction tubing and opaque polyethylene (PE) discharge tubing included with some pump models are provided to aid in pump installation. The opaque PE discharge tubing is rated for 150 PSI. It can be used as suction tubing.
The clear PVC suction tubing and opaque polyethylene (PE) discharge tubing included with some pump models are provided to aid in pump installation. The clear PVC tubing is rated for 40 PSI. It can be used on discharge as long as pressure is lower than 40 PSI.
Yes. However, size and material of suction and discharge tubing should be consistent and appropriate for the chemical, flow, and pressure of the system.
The clear PVC suction tubing and opaque polyethylene (PE) discharge tubing included with some pump models are provided to aid in pump installation. The clear PVC tubing is rated for 40 PSI. It can be used on discharge as long as pressure is lower than 40 PSI.
Suction and discharge tubing must be 1/4″ ID x 3/8″ OD compatible with compression fittings connections and must be compatible with solution being pumped. Tubing can be acquired from any provider. The A-100NFP pump is shipped with 5” of PVC suction tubing and 5“ of Polyethylene discharge tubing.
Suction and discharge tubing must be 1/4″ ID x 3/8″ OD compatible with compression fittings connections and must be compatible with solution being pumped. Tubing can be acquired from any provider. The A-100NF pump is shipped with 5” of PVC suction tubing and 5“ of Polyethylene discharge tubing.
Yes. The clear PVC suction tubing and opaque polyethylene (PE) discharge tubing included with some pump models are provided to aid in pump installation. The opaque PE discharge tubing is rated for 150 PSI. It can be used as suction tubing.
Yes. The clear PVC suction tubing and opaque polyethylene (PE) discharge tubing included with some pump models are provided to aid in pump installation. The opaque PE discharge tubing is rated for 150 PSI. It can be used as suction tubing.
Yes. The clear PVC suction tubing and opaque polyethylene (PE) discharge tubing included with some pump models are provided to aid in pump installation. The opaque PE discharge tubing is rated for 150 PSI. It can be used as suction tubing.
The clear PVC suction tubing and opaque polyethylene (PE) discharge tubing included with some pump models are provided to aid in pump installation. The clear PVC tubing is rated for 40 PSI. It can be used on discharge as long as pressure is lower than 40 PSI.
Yes. The clear PVC suction tubing and opaque polyethylene (PE) discharge tubing included with some pump models are provided to aid in pump installation. The opaque PE discharge tubing is rated for 150 PSI. It can be used as suction tubing.
The clear PVC suction tubing and opaque polyethylene (PE) discharge tubing included with some pump models are provided to aid in pump installation. The clear PVC tubing is rated for 40 PSI. It can be used on discharge as long as pressure is lower than 40 PSI.
Yes. However, size and material of suction and discharge tubing should be consistent and appropriate for the chemical, flow, and pressure of the system.
The clear PVC suction tubing and opaque polyethylene (PE) discharge tubing included with some pump models are provided to aid in pump installation. The clear PVC tubing is rated for 40 PSI. It can be used on discharge as long as pressure is lower than 40 PSI.
