Providing safe drinking water and effectively disposing of wastewater while complying with regulatory requirements can be a challenge.
Blue-White offers chemical metering pumps and flow meters for municipal use, designed to handle a wide range of chemical additives with minimal downtime and maintenance.
| GPH | LPH |
|---|---|
| .0001 - 5.60 | .0004 - 21.2 |
| PSI | Bar |
| 100 | 6.9 |
| GPH | LPH |
|---|---|
| .0085 - 17.2 | .032 - 65.1 |
| PSI | Bar |
| 125 | 8.6 |
| GPH | LPH |
|---|---|
| .0002 - 33.3 | .0007 - 126 |
| PSI | Bar |
| 125 | 8.6 |
| GPH | LPH |
|---|---|
| .0028 - 158.5 | .0108 - 600 |
| PSI | Bar |
| 125 | 8.6 |
| GPH | LPH |
|---|---|
| .0076 - 534 | .0286 - 2021 |
| PSI | Bar |
| 65 | 4.4 |
| GPH | LPH |
|---|---|
| .01 - 16.5 | .05 - 62.5 |
| PSI | Bar |
| 175 | 12 |
| GPH | LPH |
|---|---|
| .13 - 40.6 | .5 - 154 |
| PSI | Bar |
| 150 | 10.3 |
| GPH | LPH |
|---|---|
| .0007 - 7.70 | .0029 - 29.15 |
| PSI | Bar |
| 150 | 10.3 |
| GPH | LPH |
|---|---|
| .03 - 52.6 | .10 - 199 |
| PSI | Bar |
| 145 | 10 |
| System Type | |
|---|---|
| Single pump system | |
| Frame Material | |
| Polyethylene | |
| PSI | Bar |
| 150 | 10.3 |
| System Type | |
|---|---|
| Duplex pump system | |
| Frame Material | |
| Polyethylene | |
| PSI | Bar |
| 150 | 10.3 |
| System Type | |
|---|---|
| Single pump system | |
| Frame Material | |
| Polyethylene | |
| PSI | Bar |
| 150 | 10.3 |
| System Type | |
|---|---|
| Duplex pump system | |
| Frame Material | |
| Polyethylene | |
| PSI | Bar |
| 150 | 10.3 |
| System Type | |
|---|---|
| Triplex pump system | |
| Frame Material | |
| Polyethylene | |
| PSI | Bar |
| 150 | 10.3 |
| System Type | |
|---|---|
| Single pump system | |
| Frame Material | |
| Powder coated aluminum | |
| PSI | Bar |
| 125 | 8.6 |
| System Type | |
|---|---|
| Duplex pump system | |
| Frame Material | |
| Powder coated aluminum | |
| PSI | Bar |
| 125 | 8.6 |
| Turbidity Accuracy | |
|---|---|
| +/- 0.005 NTU or 2% <10NTU | |
| Turbidity Dual Range | |
| 0.001 – 10 / 10 - 40.00 NTU | |
| Sensor Response Time | |
| 4s after immersion - Turbidity | |
| Sensor | |
| White Light (LED) Flat Electrode |
| Turbidity Accuracy | |
|---|---|
| +/- 0.005 NTU or 2% <10NTU | |
| Turbidity Dual Range | |
| 0.001 – 10 / 10 - 40.00 NTU | |
| Sensor Response Time | |
| T95≤60s – Free Chlorine / T95≤5s – pH | |
| Sensor | |
| Self-cleaning, flat electrode |
| Oxidizer Accuracy | |
|---|---|
| +/- 0.01mg/L or 1% of the value w/pH compensation to 9.0 | |
| Oxidizer Range | |
| 0.00-5.00 ppm FCl2 | |
| Sensor Response Time | |
| T95≤60s – Free Chlorine / T95≤5s – pH | |
| Sensor | |
| Self-cleaning, flat electrode |
| mL/min | GPH |
|---|---|
| 10000 | .158 - 158.5 |
| PSI | Bar |
| 200 | 13.78 |
| Pipe Sizes | |
| ½” barb, ½” M/NPT, ½” PVC slip | |
Blue-White®’s water analyzers are a simple and accurate solution for measuring chlorine. The APFCL continuously tests the water for chlorine levels and can alert operators when free chlorine drops below a pre-set threshold.
Turbidity is a simple concept that is, more often than not, simple to measure and address. With the right combination of knowledge and technology, operators can keep turbidity low and deliver safe, clean drinking water to their customers.
Peristaltic pumps are extremely effective when pumping fluids that contain trapped gases because they are not affected by air bubbles…the pump maintains a constant rate of flow with no potential for vapor lock, and will not lose prime.
A Municipal Water Treatment Plant uses FLEXFLO® Peristaltic Metering Pumps to meter sodium hypochlorite to sanitize drinking water.
Please fill out the form to request a quote.
A sales rep will reach out to you.
