Performance for A2
| Model Tube | Tubing Material | Feed Rate | Max Speed | Max Pressure | Max Temp | ||
| GPH | LPH | mL/Min | RPM | PSI(bar) | °F(°C) | ||
| A2-*ND-T | Flex-A-Prene | .02 – 1.7 | .07 – 6.5 | 1 – 108 | 125 | 125 (8.6) | 185 (85) |
| A2-*NEE-T | Flex-A-Prene | .04- 4.44 | .17 – 16.8 | 2.8 – 280 | 125 | 110 (7.6) | 185 (85) |
| A2-*NGG-T | Flex-A-Prene | .17 – 17.2 | .65 – 65.1 | 10.85 – 1085 | 125 | 110 (7.6) | 185 (85) |
| A2-*TH-T | Flex-A-Chem | .14 – 14.4 | .54 – 54.0 | 9 – 900 | 125 | 50 (3.4) | 130 (54) |
| A2-*GE-T | Flex-A-Thane | .04 – 4.0 | .15 – 15.2 | 3 – 253 | 125 | 65 (4.5) | 130 (54) |
| A2-*GG-T | Flex-A-Thane | .09 – 9.3 | .35 – 35.2 | 6 – 587 | 125 | 65 (4.5) | 130 (54) |
| A2-*G2G-T | Flex-A-Thane | .15 – 14.9 | .57 – 56.7 | 9.5 – 945 | 125 | 65 (4.5) | 130 (54) |
| A2-*GH-T | Flex-A-Thane | .21 -21.23 | .8 – 80.4 | 13.4 – 1340 | 125 | 65 (4.5) | 130 (54) |
Fitting connections for A2 pump = *
“S” = 3/8” OD x 1/4” ID Tube Compression Fitting
“M” = 1/2” Male NPT
“B” = 1/2” Hose Barb
“C” = ½” – ¾” Tri-Clamp
“Q” = Quick Disconnect
“MB” = 1/2 Male BSPT
Maximum Viscosity: 5,000 Centipoise
Maximum Suction Lift: 30 ft at sea level (14.7 atm psi)
Electrical and Controls
Electrical Power Requirement: 100 to 240VAC, 50/60Hz
Motor: Brushed DC, 100:1 Turndown, Continuous Duty
Power cord options available (6 feet length):
- 115VAC 50/60HZ, NEMA 5/15 plug (U.S.)
- 220VAC 50/60HZ ,CEE 7/V11 plug (EU)
- 230VAC 50/60HZ, NEMA 6/15 (U.S.)
- 240VAC 50/60HZ, AS 3112 plug (Australia / New Zealand)
- 230VAC 50/60HZ, BS 1363/A plug (UK)
Inputs:
- 4-20 mA – fully configurable
- Frequency / Pulse input – fully configurable
- Stop/Start Dry Contact Closure (Configurable for N.O. or N.C.)
- FVS (Flow Verification System) (Flow sensor provided by others)
Outputs:
- 4-20 mA output – fully configurable (optional)
- Motor Status (Open collector)
- Motor Output (Contact closure)(optional – available only with 4-20 mA output option)
- One (1) Alarm Output – TFD and FVS
Materials of Construction
Pump Head: Valox® (PBT)
Pump Head Cover: Polycarbonate, with permanently sealed motor shaft support bronze sleeve bearing.
Cover Screws: Stainless steel, polypropylene cap.
Roller assembly: Rotor – Valox, Rollers – Nylon.
Motor Shaft: Chrome-Plated Steel
TFD Sensor: Hastelloy C
Power Cord: 3 Conductor, SJTW-A water-resistant
Mounting Brackets: 316 Stainless Steel (standard and extended)
Enclosure: NEMA 4X (IP66) Powder Coated Aluminum
Tube Fittings: PVDF (part of tube assembly)
Tube Assembly Options
Flex-A-Prene® tubing – An excellent material for most water treatment applications. Chemically resistant to 25% Sodium Hypochlorite, 50% Sodium Hydroxide, 30% Sulfuric Acid, 30% Fluosilicic Acid, Ferric Chloride, Alum and many others.
Flex-A-Chem® tubing – This material consists of an outer Norprene jacket with an inner liner that is virtually unaffected by acids, bases, salts, ketones, and alcohols.
Flex-A-Thane® tubing – This polyurethane material can be used with a variety of chemicals, including Oil and Water based Polymers, fuels and lubricants, and many others.
Flex-A-Prene®, Flex-A-Chem®, and Flex-A-Thane® tubing comply with FDA 21 CFR, 117.2600 criteria for food processing.
Dimensions and Weights
Maximum Overall Dimensions: 7.5” W x 10.25” H x 14” D (19 W x 26 H x 35.6 cm)
Product Weight: 28.4 Lb. (12.9 Kg)
Approximate Shipping Dimensions: 16” W x 17” H x 22” D ( 40.5 W x 43 H x 56 D cm)
Approximate Shipping Weight: 35 lb. (16.0kg)
Agency Listings
CE
cETLus
RoHS Compliant
