Blue-White - Chemical metering and fluid measurement solutions; chemical metering pumps, peristaltic pumps, diaphragm pumps, multi-diaphragm pumps, flow meters, flowmeters, variable area flow meters, paddlewheel flow meters, ultrasonic flow meters, engineered skid systems, single skid system, duplex skid system, triplex skid system, water analyzers...
Oswald

Industrial

F-2000

Introduction to the F-2000

Description 

The F-2000 is a paddlewheel flowmeter that accurately measures water flow through existing piping systems.  The F-2000 uses a paddlewheel technology to measure flow rates.  It is plumbed into the water lines and provides real-time measurement of flow and totalization (resettable.)  

The F-2000 flowmeter has a simple LCD display and has programmable alarm outputs and analog outputs to other devices such as PLCs or SCADA systems. 

The F-2000 is a plug-and-play flow meter that works out of the box. It can also be programmed. The F-2000 controller can be mounted directly to the provided fitting or saddle, or mounted remotely on a pipe, wall, or control panel.  

The F-2000 comes in 4 models.  

F-2000 RT is a rate and totalizer meter – no outputs. RT unit can be battery-powered or powered by a provided transformer/power cord.  

F-1000 AO is a rate and totalizer meter with analog output (4-20ma or 0-10VDC.) 

F-1000 PC is a rate and totalizer meter with batch processing and proportional dosing. The PC unit has a programmable relay output.  

F-1000 AP is a rate and totalizer meter with analog output, flow rate alarms, proportional metering, and flow totalization alarms. The AP unit is a combination of the AO and PC units.  

image 1

F-2000 Flowmeter with Polypropylene Molded Tee 

image 3

F-2000 Flowmeter with PVDF/PVC Saddle 

image 2

F-2000 Flowmeter with PVC Tee 

image 4

F-2000 Flowmeter remote mount with Saddle Mount sensor 

Product Overview / Features 

  • The F-2000 flowmeter can measure flow ranges: .4 – 8,000 GPM (1 – 27,000 LPM) 
  • Eight-digit LCD visual display. Up to 4 decimal places. Easy to read. 
  • Pre-programmed for pipe size or fitting size.  
  • Pre-programmed for GPM, LPM, or ten other units.  
  • Field programmable. 
  • Fitting options:  

3/8”, ½”, ¾”, 1”, 1.5”, and 2” molded tee MNPT or MBSPT. (Polypropylene) 

1.5”, 2”, 3”, 4”, 6”, 8”, 10” and 12” saddle mount. (PVDF, PVC) 

50mm, 63mm, 90mm, 75mm, 110mm, 160mm, 200mm, 250mm, and 315mm. 

1”, 1.5”, 2”, and 3” PVC tee slip. (PVDF, PVC) 

  • PVDF Paddle and Sensor. 
  • +/- 1% Full Scale Accuracy. 
  • Battery powered (RT only) or 15-24VDC powered or 115V/220V transformer powered. 

Applications 

The F-2000 is designed to read flows in full water lines. It can be installed on horizontal or vertical pipes.  See the installation section for the best recommendations for flowmeter location. 

The F-2000 should not be used where there is heavy particulate, stringy material, or large debris in the water lines.  

image

Please click here to see help center disclaimers.

  • Ask me a question!

Processing... ...