T-Track fitting allows for small pipe diameter capabilities (1/2”-24”)
Pipe size range ½”-100”
Virtually any acoustically conductive fluid, Dirty or Clean
Requires particles to be present in the flow stream to “reflect” the sound waves. (ie. Air bubbles, sand, etc.)
fluid contains .02%-15% (200-150,000 ppm) of particles.
Transit Time Mode:
Requires relatively “clean” fluid to enable the sound waves to complete a circuit.
0%-10% (0-100,000 ppm) of particles.
+/- 1% of rate in Transit-Time mode greater than 1 ft/sec fluid velocity
+/- 0.01 ft/sec in Transit-Time mode less than 1ft/sec fluid velocity
+/- 2% of rate in Doppler mode greater than 5 ft/sec fluid velocity
+/- 0.10 ft/sec in Doppler mode less than 5 ft/sec velocity
Interface & Data
to standard SD Card supplied with unit. User configurable to time interval, flow rate and total set-point triggers. 500,000 events with included 32MB SD Card.
Optional Computer Connection:
Ethernet, USB, RS-232, RS-485. Permits remote access and control of all functions including real-time display, system configuration, data logging, remote data capture as well as process control functions. Software permits remote internet access through local network setup.
Optional Process Control:
Three independently configurable 10 amp, form C relays. Configure to flow rate for high/low/range rate alarm for to flow total for wither manual trigger batch operations of flow triggered batch operations.
4-20 mA output: Fully configurable
0 – 1000Hz Pulse Output : Fully configurable
NEMA 4X (IP66), Powder Coated aluminum, SS clamps & hardware
Meter size: 11” H x 8 ½”W x 5” D (279H x 218W x 127D mm)
Shipping dimensions: 21” H x 17” W x 9 ½” H
Weight: 24 lb. (10.9 Kg.) Includes carry case, Excludes T-Track fixture
NIST certificates optional