CHEM-FEED® Gateway Control Box

Single, Duplex or Triplex pump options to control up to three ProSeries® pumps

  • Communications options include: Industrial Ethernet/IP, Modbus TCP and RTU, Profibus
  • NEMA 4X Stainless Steel enclosure
  • Green POWER ON light
  • UL 508A
  • Through door power disconnect
  • Factory wired to the pump junction box for simple field installation and setup
  • 6 foot liquid-tight conduit from control box to the pump’s rear junction box
  • Numbered 18 AWG wiring from control box to the pump’s plug-in terminal blocks
  • Includes complete wiring schematics and drawings
  • Phoenix Contact Bus Coupler
  • Through panel power main disconnect with indicator light
  • Single Phase 120/208/240 VAC
  • Pump control Inputs include 4-20mA speed control and remote start/stop
  • Pump outputs include scalable 4-20mA speed reference and four digit alarms
    assignable to monitor various pump functions including TFD (Tube Failure System),
    FVS (Flow Verification System), revolution counter, remote/local, input signal status,
    output signal status, motor on status, motor fault, operating mode setting, and others