CHEM-FEED® CD1F Multi-Diaphragm Pump
Will not lose prime when pumping chemicals that off-gas
Output Range: .01 – 7.70 GPH (.03 – 29 LPH) |
Max Pressure: 150 PSI (10.3 bar) |
Video
Download Size: 1920 × 1080 / 489.458MB |
Accessories
Features
The CHEM-FEED® CD1 Multi-Diaphragm Metering Pump does not lose prime when pumping chemicals that off-gas, thanks to the exclusive Hyperdrive Technology which creates smooth chemical feed. This low-maintenance pump can dose chemical against high pressures, unlike most peristaltic pumps.
Multi-Diaphragm Metering Pump:
- Exclusive Hyperlink Drive technology allows for smooth chemical feed – Patent Pending
- Dual Diaphragm with full stroke technology will not lose prime, ideal for pumping chemicals that off-gas (Peracetic Acid, Sodium Hypochlorite)
- Can pump chemicals continuously, like a peristaltic pump, without the need for tube assemblies
Capabilities:
- Output Range: .01 – 7.70 GPH (.03 – 29 LPH) and pressures to 150 PSI (10.3 bar).
Communication & Interface:
- Input: Remote Start/Stop: Non-powered dry contact closure for remote start/stop
- Input: Compatible with Flow Verification Sensors S6A and Micro-Flo
- Output: Alarm relay 250V / 3A
- Output: Motor On / Off single solid state
Superior Design:
- 3 Year Warranty
- Energy efficient BLDC motor will not overheat
- Snap-in-place wall and floor mounting bracket – Patent pending
- DiaFlex® diaphragm design will last the life of the pump, eliminates the need for expensive rebuild kits – Patented
- Manifold design allows for multiple configuration possibilities – suction and discharge ports can be positioned on the left and right side of the pump
Safety Features:
- Diaphragm Failure Detection (DFD) Senses diaphragm rupture by detecting chemical in the pump head. No false triggering – Patented
- Lockout feature prevents any unwanted tampering – Patent pending
- Display shield to protect controls from harsh environments
What’s Included:
- CD1F Multi-Diaphragm Metering Pump
- Suction tube – clear PVC – 5′ length (3/8″ OD, 1/4″ ID)
- Suction foot valve / strainer
- Suction ceramic weight
- Discharge tube – opaque polyethylene – 5′ length (3/8″ OD, 1/4″ ID)
- Discharge injection fitting with check valve
- Mounting hardware kit
- Display shield
Specifications
Max. working pressure: | 150 psig (10.3 bar) |
Max. fluid temperature: | 185° F (85° C) |
Max. Ambient temperature: | 14 to 115° F/ -10 to 42° C |
Maximum viscosity: | 5,000 Centipoise |
Maximum suction lift: | 20 ft. at 0 PSI |
Operating Voltage Range: | 100 to 240VAC-50/60Hz |
Power Cord Options: | 115V50/60Hz = NEMA 5/15 (USA) 230V50/60Hz = NEMA 6/15 (USA) 220V50/60Hz = CEE 7/VII (EU) 240V50/60Hz = AS 3112 (Australia/New Zealand) |
Motor: | Brushless DC, 50W |
Duty cycle: | Continuous |
Turndown ratio: | 1,000:1 (0.1% – 100%) |
Enclosure: | NEMA 4X (IP66), Valox® (PBT) thermoplastic |
Maximum Overall Dimensions: | 7-1/4” W x 9” H x 10” D (18.5 W x 22.9 H x 25.2 D cm) |
Product weight: | 6 lb. (2.7 Kg) |
Approximate shipping wt: | 13 lb. (5.9 Kg) |
Agency listings: | ![]()
|
Dimensions
Literature
Product Inquiry
Please fill out the form below and one of our sales representatives will contact you promptly.