C-1100 CHEM-FEED Diaphragm Pump

Max Feed: 15 GPH (56.8 LPH)
Max Pressure: 150 PSI (10.3 bar)
SKU: C-1100V Categories: , , Tags: , ,

C-1100 Variable Speed Pumps

  • Manual or Automatic control
  • Accepts 4-20mA, 0-10VDC, and pulse input signals
  • Mechanical stroke length adjustment (cam type)
  • 1 amp alarm output relay
  • Digital touch-pad with LCD
  • Flow Verification Sensor (FVS) compatible.
LiteratureDownload
Tech. Data Sheet (PDF) (PN 85000-049)

Download

Instruction Manual (PDF) (PN 80000-387)

Download

C-1100 Fixed Speed Pumps

  • Digital interval timer for near infinite turndown ratio
  • Repeating interval and injection time cycles programmable in seconds, minutes, hours, and days
  • Accepts 4-20mA, 0-10VDC, and pulse input signals
  • Flow Verification Sensor (FVS) compatible.
LiteratureDownload
Tech. Data Sheet (PDF) (PN 85000-053)

Download

Instruction Manual (PDF) (PN 80000-364)

Download

Variable Speed Models (continuous pulse free output)

Continuous pumping, even while adjusting the percentage of output. See image below.

Graphical representation of the variable speed diaphragm pump injection characteristics.
Note: Your chemical or solution is mixed in the fluid. This image is only illustrating the feed characteristics.

Fixed Speed Models (intermittent cycle time output)

You control the pumps feed by using timers (built-in or external). See image below.Usually fixed speed outputs can be adjusted by:

  • Selecting the pump head diaphragm size.
  • Manual stroke length adjustment (cam style).
  • Choosing the desired RPM (revolutions per minute).

Graphical representation of the fixed speed diaphragm pump injection characteristics.

Note: Your chemical or solution is mixed in the fluid. This image is only illustrating the feed characteristics.

Diaphragm Pump Fixed

C-1100 exploded view

LiteratureDownload
Exploded View(PDF)

Download

Installation Example of C-1100 CHEM-FEED® Diaphragm Metering Pump



C-1100 Pool Install


Mounting Options:


Wall MountShelf Mount
C-1100 Wall Mount

C-1100 Shelf Mount



Mounting Location:

  • Choose an area located near the chemical supply tank, chemical injection point and electrical supply. Although the pump is designed to withstand outdoor conditions, a cool, dry, well ventilated location is recommended. Install the pump where it can be easily serviced.
  • Mount the pump to a secure surface or wall using the enclosed hardware. Wall mount to a solid surface only. Mounting to drywall with anchors is not recommended.
  • Do not mount the pump directly over your chemical container. Chemical fumes may damage the unit. Mount the pump off to the side or at a lower level than the chemical container opening.
  • Mounting the pump lower than the chemical container will gravity feed the chemical into the pump. This “flooded suction” installation can reduce the time required to prime the pump. Install a shut-off valve, pinch clamp or other means to halt the gravity feed to the pump during servicing.
  • Your solution tank should be sturdy. Keep the tank covered to reduce fumes.
  • Be sure your installation does not constitute a cross connection with the drinking water supply. Check your local plumbing codes.

Please fill out the form below and one of our sales representatives will contact you promptly.

  • This field is for validation purposes and should be left unchanged.

Related products

Foot Valve Strainer A-1600 FLEXFLO Peristaltic Pump

  • This field is for validation purposes and should be left unchanged.

Contact Us