Chem-Pro® C2
Diaphragm Metering Pump
|
|
C2 Series
|
-
Max feed rate
20.3 GPH / 76.8
LPH
-
Max pressure
175 PSI
/ 12 bar
-
166 RPM (Maximum
strokes per minute)
-
Variable speed, Smooth
motor driven chemical feed
-
Built-in diaphragm
failure detection
-
Nema 4X washdown
/ IP 66
|
|
 |
|
|
|
Shown
with optional extended
brackets (item # 72000-380) |
C2 Series
Product Information
|
-
Easy to read, Back Lit
LCD display
-
Large Double
Ball Valve
-
Priming /
Degassing Valve - Built-in
-
Leak
Detection - Built-in Diaphragm Failure
Detection (DFD)
-
Housing
constructed of chemical resistant, powder
coated 413 aluminum
-
Suction
tubing, injection fitting, and foot valve
included
-
Tech. Data Sheet PDF
(PN
85000-096)
-
Inst.
Manual PDF
(PN
80000-453)
Other info:
|
|
|
See our ProSeries
video now.  |
|
|
|
|
Series |
Junction Box |
DFD
(leak detection) |
Input |
Output |
FVS
(Flow Verification) |
4-20 mA |
0-10 VDC |
Pulsed |
Alarm Relay
(3 Amp) |
|
C2F |
Optional |
Yes |
Yes |
No |
No |
No |
Yes |
|
C2V |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
|
|
|
|
-
Priming / pressure relief valve (located
on the pump head)
-
Pump head adapters:
-
Inlet (suction side), 1/4" ID tube
connection or Barbed for 1/2"
tubing
-
Outlet (discharge side), select one
of the following
-
3/8"
OD, 1/4" ID tube compression fittings
-
Barbed, 1/2" tubing
-
Threaded, 1/2" male
NPT
-
Threaded, 1/2" female
NPT
-
Foot valve / Strainer
-
Injection fitting with one of
the following adapters:
-
Barbed, 1/2" tubing
-
Threaded, 1/2" male NPT
-
Suction tubing, 8 feet (2.4
meters)
-
Mounting brackets (2) with
screws (extended brackets are Sold Separately)
|
|
|
|
|
Blue-White's Stainless Steel extended brackets allow the
pump to be securely mounted to most surface; floor, shelf,
or skid. The brackets lift the pump up 4-1/2 inches (114.3
mm), allowing you to easily connect the suction side of the
pump to your solution. |
-
Raise the metering pump
4-1/2 inches (114.3 mm) off the ground or a surface
-
Made out of tough
Stainless Steel
-
Provides a stable mounting surface
|
|
Item Number |
Description |
|
72000-380 |
Extended Mounting Brackets, 1 Pair, SS, 4 SS screws |
|
|
 |
|
|
|
Caution:
Always wear protective clothing, face shield, safety glasses and gloves when
working on or near your metering pump.
Additional precautions should be taken depending on the solution being
pumped. Refer to MSDS precautions from your solution supplier. |
|
Note: All
diagrams are strictly for guideline purposes only. Always consult an expert
before installing the metering pump on specialized
systems. The metering pump should be serviced by
qualified persons only. |
|
